Granite Slabs And Tiles Hanging Law

- Feb 07, 2018 -

Granite openings slot width should be 6 - 7mm, Granite Slabs and Tiles stainless steel support plate thickness should not be less than 3.0 mm, aluminum alloy support plate thickness of not less than 4.0 mm. Application of granite and stainless steel or aluminum alloy pendant epoxy resin-specific structural adhesive, stone chips before bonding rinse clean, dry before bonding construction, Granite Slabs and Tiles construction thickness should be 2mm-3mm.

Dry hanging method, Granite Slabs and Tiles also known as Hanging Law, is a new type of construction technology in the decoration of contemporary finishes. This method uses antiseptic metal pendant to hang marble, granite and other decorative stone directly on the wall or hang on the steel frame without the need of grouting. There are several specific features:

1, beautiful: dry hanging stone can completely avoid the phenomenon of traditional wet paste board appeared whitening, discoloration and other phenomena, help keep the curtain wall clean and beautiful.

2, to reduce workload: to a certain extent, Granite Slabs and Tiles improve the working conditions of construction workers, reducing labor intensity, so as to speed up the progress of the project.

3, Practicality: It can effectively avoid the phenomena of hollowing, cracking and falling off of the plate appearing in the traditional wet sticking process and obviously improve the safety and durability of the building.

Before grooving, Granite Slabs and Tiles the granite first uses the sides of the marble-mounted stone to do the grooving, the depth of the grooving is determined according to the size of the pendant, and the general requirement is not less than 10 mm. In order to ensure that the groove does not collapse, Slot distance from the edge of 1/4 side length of not less than 50mm, and clean the edge of the lime to ensure that the potting adhesive firm. Specific steps are as follows:

1, granite opening slot width should be 6--7mm, stainless steel support plate thickness should not be less than 3.0mm, aluminum support plate thickness should not be less than 4.0mm.

2, granite groove may not have damage or cracking phenomenon, Granite Slabs and Tiles the notch should be polished into 450 chamfer, the groove should be smooth and clean.

3, the slotted position of the granite should be processed according to the drawings. Granite Slabs and Tiles The length of the needle flat slot should not be less than 100mm. The effective slot length should not be less than 15mm, the slot width should be 6-7mm, the effective length of arc slot should not be less than 80mm.

4, the anchor hole should be based on the size of the stone by drawing processing, the hole from the edge of not less than three times the thickness of the stone, Granite Slabs and Tiles nor more than 180mm, steel anchor spacing should not be greater than 600mm, steel anchor hole depth should be 22- 23mm, hole diameter of 7mm or 8mm, Granite Slabs and Tiles steel anchor diameter 5mm or 6mm, steel anchor length should be 20-30mm.

5, granite and stainless steel or aluminum alloy pendant application Epoxy resin-specific structural adhesive, stone chips before bonding rinse clean, dry before bonding construction, the construction thickness should be 2mm-3mm.


Previous: Marble Slabs And Tiles Stable Performance Next: No Information

Related News

Related Products

  • G603 Grey and White Granite Slabs
  • Silver Mink Grey Marble Slabs
  • Silver Dragon Marble Slabs
  • Italy Bianco Carrara White Marble Slabs
  • Serpeggiante Italy Marble
  • Blue Ice Granite Kitchen Countertops