- Feb 10, 2018 -
Composite stone than commonly used composite ceramic tile or granite overall weight to be significantly reduced, only the transport has saved a lot of costs, the building has the load limit of the case it is the best choice.
Marble and tile, granite, natural stone and 3D composite, its bending, bending, Composite Stone Panel shear strength is significantly improved, greatly reducing the transport, installation, use of the damage rate in the process.
Ordinary Marble original plate (whole plate) in the installation process or after the use of the process, such as the use of cement wet paste, it is likely that six months or a year later, the marble surface appears a variety of discoloration and stains, very difficult to remove. Composite Stone Panel The composite plate avoids this situation because its bottom plate is more rigid and compact, and a thin layer of glue is also available.
Easier to control the color difference: Because the composite stone is 1m2 with the original plate (the board) cut into 3 or 4 pieces into the 3m2 or 4m2, and its pattern, color almost as the original plate 100%, so it is easier to ensure the use of large areas. (The original plate after the composite 3D cloth processing, to avoid the stone in the process of rupture of the situation)
Because of the above characteristics, Composite Stone Panel in the installation process, regardless of weight, easy to break (strength, etc.) or color separations have greatly improved the installation efficiency and safety, but also reduce the installation costs.
Marble and other stone decorative parts, whether inside and outside the wall, the ground, windowsill, porch, table, etc., the ordinary original plate (whole body plate) There is no problem, but the ceiling whether marble or granite, no one decoration company can not risk this risk. and the marble and 3D cloth bonded after the composite plate broke the stone decoration of the forbidden area. Because it is very lightweight, Composite Stone Panel weighs only 1/5 to 1/10 of the plate. If you want to decorate the ceiling with stone, it is not.
With 3D cloth and marble and other stone composite plate, because of its hollow characteristics so that the stone has sound insulation, moisture, heat insulation, Composite Stone Panel cold performance. Thus, these characteristics are far beyond the performance characteristics of the board. 3D cloth Composite Slate because of its sound insulation, moisture-proof, thermal insulation performance, therefore, Composite Stone Panel indoor and outdoor installation can greatly reduce the consumption of electrical energy and heat.
(1) Continuous fiber can provide maximum strength and stiffness;
(2) Product Interlaminar shearing performance, high impact strength;
(3) plate layer mode, thickness, Composite Stone Panel enhanced material type, fiber volume content can be customized to meet the needs of different industries customers;
(4) Product surface without fabric texture, Composite Stone Panel corrosion resistance, mildew, easy to clean, not affected by chemical detergent;
(5) Can be welded, easy to cut, installation and maintenance, can be hot-pressing molding, forming a short cycle, can be part of the replacement of Thermosetting FRP, Composite Stone Panel aluminum and stainless steel sheet, suitable for lightweight transport needs;
(6) Green environmental protection, recyclable, sustainable development.